Total Station, Geodimeter, GDM 610

Total Station, Geodimeter, GDM 610
Total Station, Geodimeter, GDM 610

Description:

  • Object ID: ALSA 2008.10.15
  • Made by: Geotronics, Made in Sweden
  • Model: GDM 610
  • Serial Number: 61012497
  • Date Made: Circa 1994.
  • Approximate size: 35 cm (h) X 20 cm (t) X 20 cm (w).
  • Accessories: A orange fibre case, two, silver-coloured keys, small plastic container with three fuses and one allen wrench, and a “FUJI-KOH SUNRAY” tribrach (see commentary).
  • Condition: Good

Commentary:

This total station was part of the Geodimeter 600 System. It was introduced in 1994. The system covered three classes of total stations: the Geodimeter 610, 620 and 640 with the 610 being the basic system. A feature of the system, as described in a 1996 Geodimeter brochure is that could be upgraded by adding different modules. Some of the modules that were available are tracker and radio modules which enabled the instrument to track a pole target automatically with the data acquisition controlled from the prism end, and three memory modules with capacities of 1000, 5000 or 10,000 points.

A metal plaque on bottom of this total station reads: “Geotronics,  Made in Sweden,  TYPE: GDM 610 571 202 002,  SER. NO: 61012497.” A “Stantec ….” label is attached to the front of the instrument and another one is on the back.

The “FUJI-KOH SUNRAY” tribrach has an adjustable optical plummet and a “bulls eye” level bubble. The tribrach is made in Japan and is engraved “719”. A small label inside the tribrach is hard to read but the serial number i”01633″.is visible.

Source of Object: Donated by Grant Cross, ALS (Ret.), Stantec Geomatics

Notes: The Society has only this Geodimeter 610 in its collection.

References: Visit article Measurement Technology Progresses – Total Stations for additional information.

Description by: Entered by Ed Titanich on December 11, 2024.